CLI commands

LAN IP interface context

Path: View > Enable > Config > LAN IP interface

This context provides commands for configuring various IP-networking related settings for the LAN interface.

end

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

end

Switches to parent context.

ip address

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

ip address <ip address>/<mask>

Sets a static IP address for the port.

Parameters

<address>

IP address.

</mask>

Subnet mask in CIDR format. Specifies the number of bits in the mask.

ip address management

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

ip address management <ip address>/<mask>

Sets a management IP address for this device.

Parameters

<address>

IP address.

</mask>

Subnet mask in CIDR format. Specifies the number of bits in the mask.

passive-interface

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

passive-interface

Sets RIP to operate in passive mode (listen for routing broadcasts to update the routing table, but do not broadcast own routes).

no passive-interface

Sets RIP to operate in active mode (listen for routing broadcasts to update the routing table, and also broadcast own routes).

router rip

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

router rip

Enable RIP.

2-84