Setup Menus

BQ 3107 Settings

This dialog box is displayed by selecting BQ 3107 in the Settings menu.

Operating Mode

Factory default: Block

In Block mode, keyboard entered data is displayed and processed locally, allowing you to edit it before a block of data is sent to the host. In Character mode, keyboard entered data is sent simultaneously to the host and the display.

VIP Mode

Factory default: 7760

The VIP mode can be set to 7700 or 7760.

Rendition Mode

Factory default: VIP

The setting of this option determines whether VIP or SDP display attributes are used.

Transmit Terminator

Factory default: ETX

This specifies the last character that is sent to indicate the end of a block transmission. The character can be ETX, EOT or CR.

Partition 0

Factory default: Message Row

The display is divided into two partitions numbered 0 and 1. Partition 0 is a single line that can be used to display status reports and messages either at the bottom or top of the display, as determined by the setting of the Message Row option. Partition 1 is a page of 24 lines. The setting of this option determines whether Partition 0 is Blank or used as a Message Row.

6-69