|
| Host Command Summary | |
| LOCAL EDITING |
|
|
|
|
|
|
| Data block is cursor line | ESC [ > 4 h | |
| Data block is page(s) (depends on display memory) | ESC [ > 4 l | |
| Dump block data | ESC 6 | |
| Enter character mode | ESC [ > 2 l | |
| Enter edit (block) mode | ESC [ > 2 h | |
| Modified unprotected areas only transmitted | ESC [ > 6 h | |
| Modified & unmodified unprotected areas transmitted | ESC [ > 6 l | |
| Page dump waits for host request | ESC = | |
| Transmission waits for host request | ESC S | |
| Transmit block data (excluding locked lines) | ESC 5 | |
| Transmit selected areas | ESC [ 17 l | |
| Transmit unprotected areas (depends on modified mode) | ESC [ 17 h | |
| PRINTING |
|
|
| Auto print off | ESC [ 4 i | |
| Auto print on (data not displayed) | ESC [ 5 i | |
| Initiate page dump | ESC [ > 2 i | |
| Initiate screen transfer | ESC [ > 1 i | |
| Print & display received host data | ESC [ > 3 i | |
| Print screen | ESC [ 0 i | |
| Print screen qualified areas | ESC [ > 0 i | |
| REPORTS |
|
|
|
|
|
|
| Device control string (* = string) | ESC P * ESC \ | |
| Display revision | ESC $ Z | |
| Report potentially destructive action to host | ESC ] * ESC \ | |
| * = Reset to original state notification | 0 |
|
| Clear screen notification | 2 |
|
| Load keyboard table command failed | 3 |
|
| Load keyboard table command successful | 4 |
|
| Report terminal identity | ESC [ c | |
| Report terminal identity | ESC [ 0 c | |
| Report terminal status | ESC [ * n | |
| * = Ready | 0 |
|
| Report status | 5 |
|
| Report cursor position | 6 |
|
| VISUAL ATTRIBUTES |
|
|
| Change visual attributes of area | ESC [ * p | |
| * = Active position to end of area | 0 |
|
| Start of area to active position | 1 |
|
| Entire area | 2 |
|
| Change visual attributes of character | ESC [ * q | |
| Change visual attributes of display | ESC [ * r | |
| * = Active position to end of display | 0 |
|
| Start of display to active position | 1 |
|
| Entire display | 2 |
|