Setup Menus

Terminal Settings

This dialog box is displayed by selecting Terminal in the Settings menu.

Note: The Tab Stops dialog box displayed by clicking the Set Tabs button is described in the next section.

Display Rows

Factory default: 24

This specifies the number of text rows that can be viewed in the workspace at any one time out of the total number stored in memory. This can be set to a maximum of 64. Note that the number of rows stored in memory is specified by the Memory Rows option.

Display Columns

Factory default: 80

This option enables you to specify a width of 80 or 132 columns for the workspace. When set to 132, the setting of the Use 80 Column Font option determines whether all 132 columns are displayed using a narrow font, or only 80 columns at a time using the normal (80 column) font, with the ability to scroll horizontally to view the remaining columns.

Use 80 Column Font

Factory default: Unselected

This option specifies which font to use when the Display Columns option is set to

132. When unselected, a narrow font will be used so that all 132 columns are visible in the window. When selected, only 80 columns will be visible using the normal font, with the remaining columns stored off-screen. You can scroll horizontally to view the hidden columns by holding down the Ctrl key and pressing the Left or Right Cursor keys.

6-75