Wyse Emulations

5.Click Next to display the Host Information dialog box.

For a TCP/IP connection, click the TCP/IP button, enter the name or internet address of the host computer in the Host Name box, then click Advanced for additional Telnet options. Refer to the TCP/IP Connection Settings section in chapter 2 for details.

For a modem connection, click the Modem button then click Advanced to display configuration options. Refer to the Modem Connection Settings section in chapter 2 for details.

For a serial connection, click the Serial button, specify the communications port in the Connect To box, then click Advanced for additional serial options. Refer to the Serial Connection Settings section in chapter 2 for details.

Make the relevant selections then click OK to return to the Host Information dialog box, then click Next to display the Advanced Options dialog box.

6.Click Finish to return to the Terminal Connection Manager.

7.In the Terminal Connection Manager, display the Connections list, select the session name you specified earlier in step 3, then click the Connect button.

All the Wyse associated emulations are configured via the Wyse Settings dialog box which is described in the Setup Menus chapter. Note that some settings may not apply to the particular emulation currently running. Selecting a setting that is not applicable to the current emulation will cause the emulator to use the default setting for that emulation when the dialog box is exited.

Non-WBT Mode

This section describes the basic procedure for creating a session configuration when the terminal is not in WBT mode. The options available are described in detail in the Setup Menus chapter.

1.Display the Settings menu from the command bar and select Emulation... to display the Emulation Settings dialog box.

2.Select the Wyse terminal emulation required in the Alpha Emulation list box.

The WY50, WY50+ and WY60 emulations provide compatibility with software designed to drive the Wyse WY-50, WY-50+ and WY-60 terminals, respectively.

The ADDS A2 emulation provides compatibility with software designed to drive the ADDS Viewpoint A2 terminal, as emulated by the Wyse WY-50/50+/60 terminals.

The HZ 1500 emulation provides compatibility with software designed to drive the Hazeltine 1500 terminal, as emulated by the Wyse WY-50/50+/60 terminals.

19-2