Setup Menus

The Defined Sessions list box displays one-line descriptions of session configurations that were created using the TeemTalk Connection Wizard or the Save Session As dialog box when running TeemTalk. The session configuration currently loaded is highlighted. Clicking on a defined session then the OK button will cause TeemTalk to load that session configuration.

The session configuration that TeemTalk will load by default on startup is indicated by a letter D next to its name. You can change the default selection by selecting the required session description then clicking the Save As Default button.

Session templates created by the system administrator are indicated by the letter T after the session name. Refer to the Session Management section in the Getting Started chapter for details.

You can delete any session configurations except templates by selecting the description then clicking the Delete button. Note that if the session deleted was a copy of a template (which will have the same name), the template version will reappear in the Defined Sessions list, as indicated by the letter T.

Close Session

(Not available in WBT mode)

This will close the current session.

Save Session

Selecting this option will save the current session configuration.

TeemTalk for Windows XPe

If you were using a session template and modified the settings, a local copy of the template will be made with the same name, but with the changed settings. This copy will replace the template in the list of session configurations displayed in the Open Session dialog box. Note that the T template indicator will no longer be displayed.

6-13