PT250 Emulation
Make the relevant selections then click OK to return to the Host Information dialog box, then click Next to display the Advanced Options dialog box.
6.Click Finish to return to the Terminal Connection Manager.
7.In the Terminal Connection Manager, display the Connections list, select the session name you specified earlier in step 3, then click the Connect button.
The PT250 emulation is configured using the PT250 Settings dialog box which is described in the Setup Menus chapter.
This section describes the basic procedure for creating a session configuration when the terminal is not in WBT mode. The options available are described in detail in the Setup Menus chapter.
1.Display the Settings menu from the command bar and select Emulation... to display the Emulation Settings dialog box.
2.Select the PT250 terminal emulation in the Alpha Emulation list box.
3.Display the File menu from the command bar and select New Connection to display the New Connection dialog box.
4.Select the type of host connection required in the Type list box.
For a TCP/IP connection, select TCP/IP, enter the name or internet address of the host computer in the Connect To box, then click Configure for additional Telnet options. Refer to the TCP/IP Connection Settings section in chapter 2 for details.
For a modem connection, select Modem, specify the communications port in the Connect To box, then click Configure to display configuration options. Refer to the Modem Connection Settings section in chapter 2 for details.
For a serial connection, select Serial, specify the communications port in the Connect To box, then click Configure for additional serial options. Refer to the Serial Connection Settings section in chapter 2 for details.
5.When you have specified the required settings in the New Connection dialog box, click the Connect button to make the connection.
Note: You can save these settings as a connection template using the Save Session As dialog box. Refer to the Setup Menus chapter for details.
The PT250 emulation is configured using the PT250 Settings dialog box which is described in the Setup Menus chapter.