HP 700-92/96 Emulation

10

HP 700-92/96 Emulation

This chapter describes features of the Hewlett Packard 700-92/96 terminal emulation.

Session Configuration

WBT Mode

This section describes the basic procedure for creating a session configuration when the terminal is in WBT mode. The options available are described in detail in chapter 2.

1.Click the Configure tab in the Terminal Connection Manager then click the Add button to display the New Connection dialog box.

2.Select Terminal Emulation Client and click OK. The Terminal Emulation Client Connection Wizard - Connection Information dialog box will be displayed.

3.Enter a name which will identify this session configuration for future selection in the Connection Name box.

4.Select the HP 700-92/96terminal emulation in the Emulation list box. This emulation provides compatibility with software designed to drive the Hewlett Packard 700/92, 2392A, 2622A, 70094 and 70096 terminals.

5.Specify the required HP Model setting: 70092 (default), 2392A, 2622A, 70094 or 70096. This identifies the particular terminal model being emulated in response to a terminal identification request from the host.

6.Click Next to display the Host Information dialog box.

For a TCP/IP connection, click the TCP/IP button, enter the name or internet address of the host computer in the Host Name box, then click Advanced for additional Telnet options. Refer to the TCP/IP Connection Settings section in chapter 2 for details.

10-1