HP nw8000 manual Disassembling the Hard Drive

Removal and Replacement Procedures

g.Remove the two T5M2.5×4.0 screws 1 and the

two PM3.0×3.5 screws 2 that secure the hard drive to the hard drive frame.

h.Use a 4.0-mm socket to remove the two M2.0×10.0 alignment pins 3 that secure the hard drive to the hard drive frame.

i.Remove the hard drive 4 from the hard drive frame.

j.Remove the hard drive connector 5 from the hard drive.

Disassembling the Hard Drive

Reverse the above procedure to assemble and install the hard drive.

5–10 Maintenance and Service Guide