HP nw8000 manual Removal and Replacement Preliminaries, Tools Required

4

Removal and Replacement Preliminaries

This chapter provides essential information for proper and safe removal and replacement service.

4.1 Tools Required

You need the following tools to complete the removal and replacement procedures:

■Magnetic screw driver

■Phillips P0 screw driver

■Torx8 screw driver

■Torx7 pin bit screw driver

✎Some computer models have two Torx7 with pin security screws (M2.0×4.0) securing the Mini PCI communications board to the computer. A T7 pin bit screw driver is required to remove the Mini PCI communications board on these computer models. Refer to Section 5.12, “Mini PCI Communications Board,” for more information on removing Mini PCI communications boards.

■5.0-mm socket for system board standoffs

■Flat-bladed screwdriver

Maintenance and Service Guide 4–1