Power Cord Requirements
General Requirements
The requirements listed below are applicable to all countries:
■The length of the power cord must be at least 1.5 m (5.00 ft) and a maximum of 2.0 m (6.50 ft).
■All power cords must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord will be used.
■The power cord must have a minimum current capacity of 10 amps and a nominal voltage rating of 125 or 250 V AC, as required by each country’s power system.
■The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C13 connector for mating with the appliance inlet on the back of the notebook.
Maintenance and Service Guide |
