Removal and Replacement Procedures
✎Some computer models have two Torx7 with pin security screws (M2.0×4.0) securing the Mini PCI communications board to the computer. A T7 pin bit screw driver is required to remove the Mini PCI communications board on these computer models.
3.Remove the two T8M2.0×4.0 screws 1 that secure the Mini PCI communications board shield to the notebook.
4.Lift up on the left side of the shield 2 and slide it to the left 3 to remove it.
✎The Mini PCI communications board shield is included in the Miscellaneous Plastics Kit, spare part number
Removing the Mini PCI Communications Board Shield
Maintenance and Service Guide |
