HP nw8000 manual File Menu, Select To Do This

Troubleshooting

3.To close Computer Setup and restart the notebook:

❏ Select File > Save Changes and Exit and press enter.

– or –

❏ Select File > Ignore Changes and Exit and press enter.

4.When you are prompted to confirm your action, press F10.

Selecting from the File Menu

	Table 2-1
	File Menu
Select	To Do This
System Information	■ View identification information about the
	notebook, a Port Replicator, and any battery
	packs in the system.
	■ View specification information about the
	processor, memory and cache size, and
	system ROM.
Save to Floppy	Save system configuration settings to a diskette.
Restore from Floppy	Restore system configuration settings from
	a diskette.
Restore Defaults	Replace configuration settings in Computer
	Setup with factory default settings. Identification
	information is retained.
Ignore Changes and Exit	Cancel changes entered during the current
	session, then exit and restart the notebook.
Save Changes and Exit	Save changes entered during the current
	session, then exit and restart the notebook.

Maintenance and Service Guide 2–3