HP Prime Graphing NW280AAABA manual Export BOX Begin Rect RECTP40,90,#0, Wait END

EXPORT BOX() BEGIN RECT(); RECT_P(40,90,#0 00000);

WAIT;

END;

The program below also uses the RECT_P command. In this case, the pair of arguments 320 and 240 correspond to x2 and y2. The program produces are rectangle with a black edge and a red fill.

EXPORT BOX() BEGIN RECT(); RECT_P(40,90,32 0,240,#000000,# FF0000); WAIT;

END;

SUBGROB_P

SUBGROB Syntax: SUBGROB(srcGRB [ ,x1, y1, x2, y2], trgtGRB) SUBGROB_P(srcGRB [ ,x1, y1, x2, y2], trgtGRB)

Sets trgtGRB to be a copy of the area of srcGRB between points x1,y1 and x2,y2.

srcGRB can be any of the graphics variables and is optional. The default is G0.

trgtGRB can be any of the graphics variables except G0.

x2, y2 are optional and if not specified will be the bottom right of srcGRB.

x1, y1 are optional and if not specified will be the top left of srcGRB.

Example: SUBGROB(G1, G4) will copy G1 in G4.

542 Programming in HP PPL