HP Prime Graphing NW280AAABA manual Matrices in Home, View, To store a matrix

Matrices in Home	You can enter and operate on matrices directly in Home
view	view. The matrices can be named or unnamed.
	Enter a vector or matrix in Home or CAS views directly in
	the entry line.
	1.	Press Su([])
		to start a vector or
		matrix. The matrix
		template will appear,
		as shown in the
		figure to the right.
	2.	Enter a value in the
		square. Then press
		>to enter a second value in the same row, or press
		\to move to the second row. The matrix will grow
		with you as you enter values, adding rows and
		columns as needed.
	3.	You can increase
		your matrix at any
		time, adding
		columns and rows as
		you please. You can
		also delete an entire
		row or column. Just
		place the cursor on
		the ± symbol at the end of a row or column. Then
		press +to insert a new row or column, or w to
		delete the row or column. You can also press Cto
		delete a row or column. In the figure above, pressing
		Cwould delete the second row of the matrix.
	4.	When you are
		finished, press
		Eand the
		matrix will be
		displayed in the
		History. You can then
		use or name your
		matrix.
To store a matrix	You can store a vector or matrix in a variable. You can do
	this before it is added to History, or you can copy it from
	History. When you’ve entered a vector or matrix in the

Matrices 467