HP Prime Graphing NW280AAABA manual Testing a, Zoom with, Split-screen, Viewing

Views menu The most commonly used zoom options are also available on the Views menu. These are:

•Autoscale

•Decimal

•Integer

•Trig.

These options—which can be applied whatever view you are currently working in—are explained in the table immediately above.

Testing a	A useful way of testing a zoom is
zoom with	to divide the screen into two
split-screen	halves, with each half showing
viewing	the plot, and then to apply a
	zoom only to one side of the
	screen. The illustration at the
	right is a plot of y = 3sin x. To
	split the screen into two halves:
	1.	Open the Views menu.
		Press V
	2.	Select Split Screen:
		Plot Detail.
		The result is shown at the
		right. Any zoom operation
		you undertake will be
		applied only to the copy of the plot in the right-hand half of
		the screen. This will help you test and then choose an
		appropriate zoom.
	Note that you can replace the original plot on the left with the
	zoomed plot on the right by tapping .
	To un-split the screen, press P.
Zoom	The following examples show the effects of the zooming options
examples	on a plot of 3 sinx using the default zoom factors (2 × 2). Split-
	screen mode (described above) has been used to help you see the
	effect of zooming.

An introduction to HP apps 91