HP Prime Graphing NW280AAABA To activate exam mode, Tap If a configuration other than Default

To activate exam mode:

1.If the Exam Mode screen is not showing, press SH, tap and

tap .

2.If a configuration other than Default

Exam is required, choose it from the Configuration list.

3.Select a time-out period from the Timeout list.

Note that 8 hours is the maximum period. If you are preparing to supervise a student examination, make sure that the time-out period chosen is greater than the duration of the examination.

4.Enter a password of between 1 and 10 characters. The password must be entered if you—or another user—wants to cancel exam mode before the time-out period has elapsed.

5.If you want to erase the memory of the calculator, select Erase memory. This will erase all user entries and return the calculator to its factory default settings.

6.If you want the exam mode indicator to flash periodically while the calculator is in exam mode, select Blink LED.

7.Using the supplied USB cable, connect a student’s calculator.

Insert the micro-A connector—the one with the rectangular end—into the USB port on the sending calculator, and the other connector into the USB port on the receiving calculator.

8.To activate the configuration on an attached

calculator, tap . The Exam Mode screen closes. The connected calculator is now in exam

Exam Mode 65