HP Prime Graphing NW280AAABA manual SideC, AngleA, AngleB, AngleC

SideC	The length of Side c. Sets the length of the side opposite
	the angle C. From the Triangle Solver Numeric view, enter
	a positive value for c.
	In a program, type:
	n SideC
	where n > 0
AngleA	The measure of angle A. Sets the measure of angle A. The
	value of this variable will be interpreted according to the
	angle mode setting (Degrees or Radians). From the
	Triangle Solver Numeric view, enter a positive value for
	angle A.
	In a program, type:
	n AngleA
	where n > 0
AngleB	The measure of angle B. Sets the measure of angle B.
	The value of this variable will be interpreted according to
	the angle mode setting (Degrees or Radians). From the
	Triangle Solver Numeric view, enter a positive value for
	angle B.
	In a program, type:
	n AngleB
	where n > 0
AngleC	The measure of angle C. Sets the measure of angle C.
	The value of this variable will be interpreted according to
	the angle mode setting (Degrees or Radians). From the
	Triangle Solver Numeric view, enter a positive value for
	angle C.
	In a program, type:
	n AngleC
	where n > 0

574 Programming in HP PPL