HP Sander 16500C manual ESE Event Status Enable, ESE mask, Ese?

Common Commands

*ESE (Event Status Enable)

	*ESE (Event Status Enable)
Command	*ESE <mask>
	The *ESE command sets the Standard Event Status Enable Register bits.
	The Standard Event Status Enable Register contains a bit to enable the
	status indicators detailed in table 9-2. A 1 in any bit position of the Standard
	Event Status Enable Register enables the corresponding status in the
	Standard Event Status Register.
<mask>	An integer from 0 to 255
Example	In this example, the *ESE 32 command will enable CME (Command Error),
	bit 5 of the Standard Event Status Enable Register. Therefore, when a
	command error occurs, the event summary bit (ESB) in the Status Byte
	Register will also be set.
	OUTPUT XXX;"*ESE 32"
Query	*ESE?
	The *ESE query returns the current contents of the enable register.
Returned Format	<mask><NL>
Example	OUTPUT XXX;"*ESE?"
See Also	Refer to chapter 7, "Status Reporting" for a complete discussion of status.

9–6