HP Sander 16500C manual Echoing Commands

Example

Example

Programming Over LAN

Echoing Commands

Echoing Commands

To send a command directly from the command line or prompt of your PC or workstation to the HP 16500C system, echo a text string containing the command to the file location \system\program.

In order to send commands to the HP 16500C system parser, you must be connected to the system as the control user.

To run the logic analyzer and acquire data, at the DOS prompt enter:

c:>echo :START > L:\system\program

If you are using a UNIX system, you can use the UNIX echo command.

An HP 16550A state/timing analyzer is installed in slot C (slot 3) of your

HP 16500C mainframe. To clear the trigger set-up on the HP 16550A, at the DOS prompt enter:

c:>echo :SELECT 3 > L:\system\program

c:>echo :MACHINE1:STRIGGER:CLEAR ALL > L:\system\program

If you are using a UNIX system, you can use the UNIX echo command. The first command selects the state/timing analyzer in slot C. The second command clears the trigger.

4–6