HP Sander 16500C manual CommandSELect module, SELect?

Mainframe Commands

SELect

SELect

Command:SELect <module>

<module>

Example

Query

Returned Format

Example

The SELect command selects which module (or system) will have parser control. The appropriate module (or system) must be selected before any module (or system) specific commands can be sent. SELECT 0 selects System, SELECT 1 through 5 selects modules A through E in an HP 16500C only. SELECT 1 through 10 selects modules A through J when an HP 16501A is connected. –1 and –2 selects software options 1 and 2 respectively. The query returns the current module selection.

When a module is selected, the parser recognizes the module’s commands and the System/Intermodule commands. When SELECT 0 is used, only the System/Intermodule commands are recognized by the parser. Figure 10-2 shows the command tree for the SELect command.

Selects module or system. An integer from –2 through 5 for HP 16500C only or an integer from –2 through 10 with an HP 16501A connected.

OUTPUT XXX;":SELECT 0"

:SELect?

The SELect? query returns the current module selection.

[:SELect] <module><NL>

OUTPUT XXX;":SELECT?"

10–21