HP Sander 16500C manual MMEMoryAUToload?

MMEMory Subsystem

AUToload

	AUToload
Command	:MMEMory:AUToload {{OFF0}{<auto_file>}}[,<msus>]
	The AUToload command controls the autoload feature which designates a set
	of configuration files to be loaded automatically the next time the instrument
	is turned on. The OFF parameter (or 0) disables the autoload feature. A
	string parameter may be specified instead to represent the desired autoload
	file. If the file is on the current drive, the autoload feature is enabled to the
	specified file. The configuration files specified must reside in the root
	directory of the current drive.
<auto_file>	A string of up to 10 alphanumeric characters for LIF in the following form:
	NNNNNNNNNN
	or
	A string of up to 12 alphanumeric characters for DOS in the following form:
	NNNNNNNN.NNN
<msus>	Mass Storage Unit specifier. INTernal0 for the hard disk drive and
	INTernal1 for the flexible disk drive.
Example	Disabling autoload:
	OUTPUT XXX;":MMEMORY:AUTOLOAD OFF"
	Setting FILE2 on the hard drive as the autoload file:
	OUTPUT XXX;":MMEMORY:AUTOLOAD ’FILE2 ’,INTERNAL0"
Query	:MMEMory:AUToload?
	The AUToload query returns 0 if the autoload feature is disabled. If the
	autoload feature is enabled, the query returns a string parameter that
	specifies the current autoload file.
Returned Format	[:MMEMory:AUToload] {0<auto_file>},<msus><NL>
Example	OUTPUT XXX;":MMEMORY:AUTOLOAD?"

12–7