HP Sander 16500C manual STORe CONFig, MMEMorySTOReCONfig name,msus, Description,module

MMEMory Subsystem

STORe [:CONFig]

	STORe [:CONFig]
Command	:MMEMory:STORe[:CONfig] <name>[,<msus>],
	<description>[,<module>]
	The STORe command stores configurations onto a disk. The [:CONFig]
	specifier is optional and has no effect on the command. The <name>
	parameter specifies the file on the disk. The <description> parameter
	describes the contents of the file. The optional <module> parameter allows
	you to store the configuration for either the system or the modules. If the
	optional <module> parameter is not specified, the configurations for the
	system, modules, and any installed software options are stored.
<name>	A string of up to 10 alphanumeric characters for LIF in the following form:
	NNNNNNNNNN
	or
	A string of up to 64 alphanumeric characters for DOS in one of the following
	forms:
	NNNNNNNN.NNN when the file resides in the current directory or
	\NAME_DIR\FILENAME when it does not reside in the current directory
<msus>	Mass Storage Unit specifier. INTernal0 for the hard disk drive and
	INTernal1 for the flexible disk drive.
<description>	A string of up to 32 alphanumeric characters
<module>	An integer, –2 through 5 for the HP 16500C alone. –2 through 10 with an
	HP 16501A connected.
Example	OUTPUT XXX;":MMEM:STOR ’DEFAULTS’,’SETUPS FOR ALL MODULES’"
	OUTPUT XXX;":MMEMORY:STORE:CONFIG ’STATEDATA’,INTERNAL0,
	’ANALYZER 1 CONFIG’,1"

The appropriate module designator "_X" is added to all files when they are stored. "_X" refers to either an __ (double underscore) for the system or an _(A through E) for an HP 16500C alone or an _(A through J) with an HP 16501A connected.

12–23