HP Sander 16500C manual SYSTemPRINt SCReen,DISK, pathname ,msus, Btifctifpcxeps

SYSTem Subsystem

PRINt

PRINt

Commands:SYSTem:PRINt ALL[,DISK, <pathname>[,<msus>]] :SYSTem:PRINt PARTial,<start>,<end> [,DISK, <pathname>[,<msus>]]

:SYSTem:PRINt SCReen[,DISK, <pathname> [,<msus>], {BTIFCTIFPCXEPS}]

The PRINt command initiates a print of the screen or listing buffer over the current PRINTER communication interface to the printer or to a file on the disk. PRINt ALL is only available in menus with an ASCII representation.

PRINt SCReen allows you to specify a graphics type. The BTIF option formats the screen data in black-and-white TIF. The CTIF and PCX options format the data in color TIF and color PCX respectively. EPS specifies Encapsulated PostScript format.

If a file name extension is not specified in the command, the correct extension will be appended to the file name automatically. The file name extension is TIF for both BTIF and CTIF options.

PRINT PARTial is valid in certain listing menus. It allows you to specify a starting and ending state number so you can print just a portion of the listing to the printer or to a disk file.

<pathname> A string of up to 10 alphanumeric characters for LIF in the following form:

NNNNNNNNNN

or

A string of up to 64 alphanumeric characters for DOS in one of the following forms:

NNNNNNNN.NNNwhen the file resides in the present working directory

or

\NAME_DIR\FILENAME when the files does not reside in the present working directory

<msus> Mass Storage Unit specifier. INTernal0 for the hard disk drive and INTernal1 for the flexible disk drive.

<start> An integer specifying a state number. <end>

11–10