To connect the X-Fi sound card to your speakers:

1Use the audio connection table to connect your audio system to the sound card.

2Turn on the computer.

3Plug in and turn on the speaker system power.

After connecting the speaker system to the sound card, follow the steps in “Configuring the FlexiJack connector” to configure the speaker settings in the Creative Sound Blaster X-Fi software.

Connecting the FlexiJack connector

The FlexiJack connector performs three functions:

￿Digital Input/Output

￿Line In

￿Microphone

You must select the function in the Creative Console Launcher.

NOTE: If you are using the FlexiJack as your Digital In connection and you want to connect digital speakers as your output device, you will need a special connector from Creative.

32Getting Started (features vary by model)