HP StoreServ Application Suite for Oracle Media manual

Recovery Manager for Oracle User’s Guide

In the example above:

◆<adm_user> is the user name of the InServ Storage Server’s administrator.

◆<ss_name> is the system name of the InServ Storage Server attached to the primary host.

◆<adm_password> is the administrator's password.

◆<password> is the password (for the InForm Storage Server) for the CLI user being created.

◆<username> is the user being created.

4Copy the public key of the primary host to the InServ Storage Server.

<primary_host># ssh <username>@<ss_name> <username>'s password: <password>

cli% setsshkey

Please enter the SSH puplic key below. When finished, press enter twice. The key is usually long. It's better to copy it from inside and editor and paste it here. (Please make sure there are no extra blanks.)

<pass the public key here and press Enter twice>

<public_key>

SSH public key successfully set!

In the example above:

◆<username> is the user being created.

◆<ss_name> is the system name of the InServ Storage Server attached to the primary host.

◆<password> is the password for the CLI user being created.

◆<public_key> is the SSH public key of the primary host.

4.3.12Verifying Connections from the Primary Host to the InServ Storage Server

From the primary host, verify the connection from the primary host to the InServ Storage

Server as follows:

Setting Up SSH Connections for Recovery Manager

4.17