HP StoreServ Application Suite for Oracle Media manual Vcdbacheckconfig

Recovery Manager for Oracle User’s Guide

COMMAND

vcdba_checkconfig

SYNOPSIS

vcdba_checkconfig [-s <oracle_sid> -p <primary_host>] [-o allskipdatabasedatabaseonly] [-v]

DESCRIPTION

The vcdba_checkconfig command validates a Recovery Manager configuration file for a specified database. A configuration file must have been created prior to using this command.

By default, all configured parameters in the specified configuration file will be validated. One can select to validate only database parameters or non-database parameters.

You must run this command as a super user from the backup host. To allow the Oracle Database Administrator (Oracle Owner) to run this command, an identical Oracle Database Administrator user must exist on the backup host. In addition, permission on the 3PAR Recovery Manager Installation and Repository directories must be changed appropriately.

OPTIONS

The following options are supported:

■-s <oracle_sid> - The instance SID of the primary database. For an RAC database, any instance SID can be specified.

■-p <primary_host> - The corresponding hostname of the primary (database) host where the specified Oracle database instance is running. The value of the primary host name must match the output of the hostname command.

■-o all - Validates all parameters specified in the Recovery Manager configuration file.

■-o skipdatabase - Validates all non-database parameters specified in the Recovery Manager Configuration file.

■-o databaseonly - Validates all database parameters specified in the Recovery Manager Configuration file.

■-v- Runs the command in verbose mode to display useful messages.

COMMAND

6.7