HP StoreServ Application Suite for Oracle Media manual Recovery Manager Configuration Files

Recovery Manager for Oracle User’s Guide

4.9 Recovery Manager Configuration Files

The following section provides instructions on creating Recovery Manager configuration files.

There are two types of configuration files for Recovery Manager:

■Recovery Manager without Remote Copy support.

For this type of configuration, Recovery Manager provides an integrated Veritas NetBackup and Oracle RMAN for backups and restorations.

■Recovery Manager with Remote Copy.

For this type of configuration, Recovery Manager does not provide tools for media backups and restorations.

You can choose to create the Recovery Manager configuration file by either using the Command Line Interface (CLI), menu-driven application, or a Graphical User Interface (GUI).

NOTE: New features are no longer being added to the menu-driven application.

4.9.1 Creating a Recovery Manager Configuration File without Remote Copy

The configuration file can be created in the following ways:

■Menu-driven application

■CLI

■GUI

4.9.1.1Creating Configuration Files using the Menu-Driven Application or the Command Line Interface on the Backup Host

To create a Recovery Manager configuration file without Remote Copy support:

1From the backup host, start Recovery Manager.

<backup host># opt/3par/vcdbaora/bin/vcdba_main

2If you are using the CLI, from the backup host, issue /opt/3par/vcdbaora/bin/ vcdba_config, and then skip to step 4.

Recovery Manager Configuration Files

4.27