HP StoreServ Application Suite for Oracle Media manual Cli% showrcopy groups groupname

Recovery Manager for Oracle User’s Guide

where:

◆<username> is the InServ Storage Server CLI user.

◆<ss_name> is the system name of the secondary/remote InServ Storage Server, which is attached to the backup host.

◆You are note prompted for a password if set up correctly.

3Verify the Remote Copy ports.

cli% showport -rcip

The following is sample output from the showport -rcipcommand:

N:S:P State HW Address IP Address Netmask Gateway MTU 0:5:1 ready 0002B3C03DF2 193.1.1.1 255.255.255.0 - 1500 1:5:1 ready 0002B3C03E94 194.1.1.1 255.255.255.0 - 1500

4Verify the Remote Copy secondary/remote groups (datafile group and archive log group).

cli% showrcopy groups <group_name>

where:

◆<group name> is the name of the Remote Copy group which contains all virtual volumes used by database datafiles.

NOTE: Ensure the group is in the Start state and in Periodic mode.

5Verify the Remote Copy targets.

cli% showrcopy targets <target_name>

Verifying Remote Copy Settings

9.7