HP StoreServ Application Suite for Oracle Media Backuphost# /opt/3par/vcdbaora/bin/vcdbamain

Recovery Manager for Oracle User’s Guide

4.9.2 Creating a Recovery Manager Configuration File Using Remote Copy

Before creating the configuration files for Recovery Manager to use, you must do the following:

■Set up physical links between the local and remote InServ systems. Refer to the 3PAR Remote Copy User’s Guide for instructions on setting up links.

■Set up Remote Copy targets for the local and remote InServ systems.

■Create one Remote Copy groups, assign all virtual volumes used by datafiles and archive log destinations to the group.

CAUTION: If Veritas Volume Manager is being used when assigning 3PAR virtual volumes to Remote Copy groups, all volumes in the same Veritas disk group should be assigned to one Remote Copy group, whether they are actually being used by the Oracle database or not. Otherwise, you might not be able to import and mount file systems on the remote backup host. Therefore, it is strongly suggested that Veritas disk groups only contain files used by one Oracle database.

■Start Remote Copy and verify its setup.

4.9.2.1Creating Configuration Files using the Menu Driven Application or Command Line Interface on the Backup Host

To create the Recovery Manager configuration files:

1From the backup host, start Recovery Manager.

<backup_host># /opt/3par/vcdbaora/bin/vcdba_main

2If you are using the CLI, from the backup host, issue /opt/3par/vcdbaora/bin/ vcdba_config, and then skip to step 4.

3If you are using the menu-driven application, from the backup host: a Select option 1, Configuration Administration.

b Select option 1, Create A Backup Configuration.

4When prompted, press ENTER .

5When prompted, answer the following questions:

4.40

Recovery Manager Configuration Files