HP StoreServ Application Suite for Oracle Media manual Verifying Remote Copy Settings

Recovery Manager for Oracle User’s Guide

9.3 Verifying Remote Copy Settings

9.3.1 Verifying the Primary/Local Remote Copy Setting

To verify the primary/local Remote Copy setting:

1Log in to the primary host as root user.

2Connect to the primary/local InServ Storage Server from the primary host using either SSH or RSH:

<primary_host># ssh <username>@<ss_name>

where:

◆<username> is the InServ Storage Server user.

◆<ss_name> is the system name of the primary/local InServ Storage Server, which is attached to the primary host.

◆You are not prompted for a password if set up correctly.

3Verify the Remote Copy ports.

cli% showport -rcip

NOTE: Ensure the ports are in the ready state.

The following is sample output from the showport -rcipcommand:

N:S:P State HW Address IP Address Netmask Gateway MTU 0:5:1 ready 0002B3C03DF2 193.1.1.1 255.255.255.0 - 1500 1:5:1 ready 0002B3C03E94 194.1.1.1 255.255.255.0 - 1500

4Verify the Remote Copy primary/local group (datafile group and archive log group).

cli% showrcopy groups <group name>

Verifying Remote Copy Settings

9.5