HP StoreServ Application Suite for Oracle Media manual Cli

Recovery Manager for Oracle User’s Guide

4.2 Setting up RSH/CLI Connections for Recovery Manager

NOTE: RSH connections are available for Solaris systems only.

This section describes how to set up RSH/CLI for a root user on the primary host, backup host, Veritas NetBackup master server, and the InServ Storage Server.

NOTE: If you are setting up an RSH connection, you must install the 3PAR InForm Command Line Interface (CLI) in the /opt/3par/cli directory prior to installing 3PAR Recovery Manager. Refer to the InForm OS CLI Administrator’s Manual for instructions on installing the InForm CLI.

Figure 4-1represents the RSH/CLI connections relationship between the primary host, the backup host, Veritas NetBackup master server, and the InServ Storage Server.

Figure 4-2represents the RSH/CLI connection relationship with 3PAR Remote Copy support.

Primary Host

Root User

RSH

Backup

Host

Root User

RSH

Veritas

NetBackup

Master

Server

Root User

CLI	CLI
Connection	Connection

Recovery Manager

User

InServ Storage

Server

Figure 4-1.RSH/CLI Connection Relationship

Setting up RSH/CLI Connections for Recovery Manager 4.3