HP StoreServ Application Suite for Oracle Media Installing Recovery Manager on Linux Systems

Recovery Manager for Oracle User’s Guide

3.3 Installing Recovery Manager on Linux Systems

Use the instructions in this section to install 3PAR Recovery Manager software on both the primary and backup hosts.

3.3.1 Starting Installation

The following section describes the steps necessary for installing 3PAR Recovery Manager on a Linux system:

CAUTION: When upgrading to a newer version of 3PAR Recovery Manager, any previously installed versions of Recovery Manager must be removed. Use the rpm -e VCDBAora command to remove the previously installed package.

To install 3PAR Recovery Manager:

1Log in as the root user.

2Insert the 3PAR Recovery Manager CD into a CD-ROM drive.

NOTE: If the CD is not mounted automatically, you can mount it manually.

# mount -t iso9660 -r /dev/cdrom /mnt/cdrom

3Change to the CD-ROM drive.

#cd /mnt/cdrom0

4Issue the rpm command as follows:

#rpm –ihv –-percent -–nodeps VCDBAora-302-1.i386.rpm

3.4

Installing Recovery Manager on Linux Systems