HP StoreServ Application Suite for Oracle Media manual

Recovery Manager for Oracle User’s Guide

For details about the createuser command, refer to the InForm OS Command Line Interface Reference.

4Copy the public key of the backup host to the InServ Storage Server.

<backup_host># ssh <username>@<ss_name> <username>'s password: <password>

cli% setsshkey

Please enter the SSH puplic key below. When finished, press enter twice. The key is usually long. It's better to copy it from inside and editor and paste it here. (Please make sure there are no extra blanks.)

<pass the public key here and press Enter twice>

<public_key>

SSH public key successfully set!

In the example above:

◆<username> is the user being created.

◆<ss_name> is the system name of the InServ Storage Server attached to the backup host.

◆<password> is the password for the CLI user being created.

◆<public_key> is the SSH public key of the backup host.

4.3.10Verifying Connections from the Backup Host to the InServ Storage Server

From the backup host, verify the connection from the backup host to the InServ Storage Server

as follows:

NOTE: If you are prompted for a password, the setup is incorrect and you must

redo the previous setup.

Setting Up SSH Connections for Recovery Manager

4.15