HP XP128, XP10000 manual Setting and verifying the auto-mount parameters, Example

drwxr-xr-t		2	root	root	8192	Mar	15
11:35	lost+found
-rwxr-xr-x		1	root	sys	217088	Mar	15
11:41	vi.back1
-rwxr-xr-x		1	root	sys	217088	Mar	15
11:52	vi.back2

Setting and verifying the auto-mount parameters

Set up and verify the auto-mount parameters for each new volume. The /etc/checklist file (which can also be called the /etc/fstab file) contains the auto-mount parameters for the logical volumes.

To set up and verify the auto-mount parameters:

1.Edit the /etc/checklist (/etc/fstab) file to add a line for each OPEN-xdevice on the disk array. This example and the following table show the auto-mount parameters.

Example

#cp -ip /etc/checklist /etc/checklist.standard
#vi /etc/checklist
/dev/vg00/lvol1	/	hfs	rw	0	1	#	root
/dev/vg00/lvol2	swap	ignore	rw	0	0	#	primary swap
:
/dev/vg06/lvol1	/AHPMD-LU00	hfs	defaults	0	2	#	AHPMD-LU00
/dev/vg06/lvol2	/AHPMD-LU01	hfs	defaults	0	2	#	AHPMD-LU01
P1	P2	P3	P4	P5	P6	P7

52 HP StorageWorks Disk Array XP Operating System Configuration Guide: HP-UX