HP XP10000, XP128 Mounting and verifying the file systems, To mount and verify the file systems

Mounting and verifying the file systems

After the mount directories have been created, mount and verify the file system for each logical volume.

To mount and verify the file systems:

1. Use mount to mount the file system for the volume.

Example # mount /dev/vg06/lvol1 /AHPMD-LU00

2.Repeat step 1 for each logical volume on the disk array.

If you need to unmount a file system, use the unmount command.

Example

Example

3.Use the bdf command to verify that the file systems are correct. The capacity is listed under Kbytes.

# bdf
Filesystem	Kbytes	used	avail	%used	Mounted on
/ldev/vg00/lvol1	59797	59364	0	100%	/
:
/ldev/vg06/lvol1	2348177		9 2113350		0%	/AHPMD-LU00

4.As a final verification, perform some basic UNIX operations (for example file creation, copying, and deletion) on each logical device to make sure that the devices on the disk array are fully operational.

#cd /AHPMD-LU00

#cp /bin/vi /AHPMD-LU00/vi.back1

#ls -l
drwxr-xr-t		2	root	root	8192	Mar	15
11:35	lost+found
-rwxr-xr-x		1	root	sys	217088	Mar	15
11:41	vi.back1

#cp vi.back1 vi.back2

#ls -l

Installation 51