Connect another Video Out

To temporarily change Video Out such as DVI, VGA, S-video, or composite video (any output other than component video):

1Turn off the TV/Display.

2Turn off the HP Digital Entertainment Center by pressing and holding the On/Standby power button for 4 seconds. The On/Standby button should be dark and not lit amber or blue.

3Disconnect the component video cable from the HP Digital Entertainment Center back-panel Video Out.

4Connect another Video Out, such as DVI, VGA, S-video, or composite video cable to the HP Digital Entertainment Center back-panel Video Out.

NOTE: If your TV/Display can accept DVI or VGA video, connect DVI or VGA video, for a higher- quality image.

5Turn on the TV/Display.

6Switch the TV/Display input to the DVI, VGA, S-video, or composite video input.

7Turn on the HP Digital Entertainment Center by pressing the On/Standby power button. a Wait 1 to 2 minutes. The video image reappears.

b Do not restart your HP Digital Entertainment Center.

HP Digital Entertainment Center TV/Display Setup Guide 27