HP ZBook 14 Mobile manual

4.Disconnect the power cord from the power outlet, and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer.

5.Remove the computer from the stand and lay the computer down with the right side up.

6.Remove the computer access panel and back I/O panel. See Removing and replacing the access panel on page 10.

7.If the computer is an HP t620 PLUS Thin Client, push the fan assembly latch (1) toward the front of the computer and rotate the assembly (2) up and out of the way.

8.Remove the two screws securing the SSD to the system board.

44 Appendix E Shipping information