Presentation Rider 11, 11 C, Clutch pedal | Husqvarna 15 C, 13 AWD

PRESENTATION RIDER 11, 11 C

Throttle and Choke lever

The engine speed is adjusted with the throttle control, and thereby also the rotation speed of the blades.

The control is also used to activate the choke function. When the choke is used the engine receives a richer mixture of fuel and air, which simplifies cold start.

Clutch pedal

The clutch pedal disengages the engine and stops forward movement.

The blades are not affected by the clutch pedal.

Brake pedal / Parking brake

The brake pedal activates a disc brake which is placed on the gearbox and brakes the drive wheels. When braking the clutch pedal should also be pushed down to achieve best braking power.

The brake pedal also operates as a parking brake if the lock button is pressed in when the pedal is pressed.

6004-004

6004-005

6004-006

12– English

Image 14

Husqvarna 15 C, 13 AWD Presentation Rider 11, 11 C, Throttle and Choke lever, Clutch pedal, Brake pedal / Parking brake

Contents

Rider 11 Rider 11 C Rider 13 C Rider 13 AWD Rider 15 C Page Contents Travel and transport on public roads IntroductionDear customer Towing Good service Serial number Explanation of Symbols Slope Safety Instructions General use Keep children away from the area to be mowed Driving on slopes Proceed as follows Maintenance Children Do not smoke when carrying out maintenance Transport Location of the controls PresentationPresentation Clutch pedal Presentation Rider 11, 11 CThrottle and Choke lever Brake pedal / Parking brake Parking brake Presentation Rider 13 C, 13 AWD, 15 CSpeed limiter Cutting unit Lift lever for cutting unit Fuelling Lever for adjustment of cutting heightSeat Starting the engine DrivingBefore starting Rider 13 AWD Cold engine Warm engine To start an engine with a weak battery To remove cables, reverse order For Rider 11 and Rider 11 C Driving the machineFor Rider 13 C, Rider 13 AWD and Rider 15 C Cutting tips Hill start, manual gearbox Stopping the engine Rear Axle Release lever Rider 13 C, Rider 13 AWD Rider 15 CRelease lever Rider 13 AWD Front Axle Maintenance Maintenance schedule Cleaning Avoid using a high pressure washer or a steam cleaner Front hood Rider Dismantling of the machine hoodsEngine hood Left-hand fender Inspecting the silencerRight-hand fender Checking and adjustment of the steering wires Poorly adjusted brakes can result in reduced braking power Adjusting the brake Rider 11 and Rider 11 CCheck and adjust the brakes on Rider 13 C and Rider 15 C Checking the brake Rider 11 and Rider 11 C Adjusting the Parking Brake Rider 13 AWD Adjustment of the throttle wire Replacement of the fuel filter Replacing the air filter Checking of the fuel pump’s air filter Check the level of the battery acidProcedures on contact with acid Fitting the wrong spark plug type can damage the engine Inspecting the safety system Rider 13 AWD Check the engine’s cooling air intake Main fuseChecking the tyre pressure Checking the cutting unit’s parallelism Adjustment of the cutting unit’s parallelism for the Rider Removing the mulching plug Placing in service position Maintenance Rider 11C,13C, 13 AWD,15CService position for BioClip 6017-221 8009-583 8009-122 6017-223 Restoring from service position Take care not to get your hand trapped Checking the blades Changing the oil LubricationCheck the engine’s oil level Lubrication of belt tensioner Rider 13 C, Rider 15 C Lubrication of front wheel bearings Lubrication Rider 11 and Rider 11 CGeneral lubrication Trouble Shooting Schedule Problem Procedure Winter storage ServiceStorage Cover Technical Data Dimensions Rider 13 C Electrical system Dimensions Rider 15 C EU-DECLARATION of Conformity EU declaration of conformity Only applies to Europe After first 5 hours ServicejournalPre-delivery service Work done Work done Date, mileage, stamp, sign English 115 01