LUBRICATION

Check the transmission’s oil level

Rider 13 C, Rider 13 AWD and Rider 15 C

1.Lift off the transmission cover. Release the two screws (one of each side) and lift off the trans- mission cover.

2.Rider 13 C, Rider 15 C

Check that there is oil in the transmission oil tank. Top up if necessary with engine oil SAE 10W/30 (class SF–CC).

Rider 13 AWD

Check that there is oil in the transmission oil tank. Top up if necessary with engine oil SAE 10W/40 (class SF–CC).

The oil should be changed by an authorised service workshop, and is described in the Workshop Manual.

The filter is replaced at the same time as changing the oil.

Work on the system entails particular demands on cleanliness and the system must be vented before the machine is used.

Lubrication of belt tensioner

The belt tensioner must be lubricated regularly with high-quality molybdenum sulphide grease*.

Inject grease into the nipple on the right side below the engine bottom pulley until grease is forced out.

With daily use lubrication should be conducted twice a week.

8009-585

6021-030

6008-240H

6008-232

English – 43

Page 45
Image 45
Husqvarna 13 AWD manual Lubrication of belt tensioner, Rider 13 C, Rider 15 C