Husqvarna 15 C, 13 AWD manual Lubrication Rider 11 and Rider 11 C, General lubrication

LUBRICATION

Lubrication Rider 11 and Rider 11 C

Lubrication of front wheel bearings

On Riders with rear ejection the hood and wings must be removed so that the bar can be raised to allow removal of the wheel.

1.Remove the plastic cover on the hub.

2.Remove the lock-ring and washer on the front wheel axle.

3.Lift off the wheel.

4.Grease the axle journal with molybdenum sulphide grease*.

5.Assemble the parts in the reverse order.

IMPORTANT INFORMATION

Check that the lock-ring is correctly positioned in the slot.

*Grease from well-known brand names (petrol companies, etc.) usually maintains a good quality. The most important property is that the grease provides good protection against corrosion.

General lubrication

All joints and bearings are lubricated on manufac- ture with molybdenum sulphide grease. Re-grease with same type of grease*. Lubricate the steering and control wires with engine oil.

The machine should be lubricated regularly, and twice a week when used daily.

*Grease from well-known brand names (petrol companies, etc.) usually maintains a good quality. The most important property is that the grease provides good protection against corrosion.

8009-584

44– English