AMX NXI-x000 Series manual NI-2000 Specifications Cont, Introduction, Rear Panel Connectors Cont

Introduction

NI-2000 Specifications (Cont.)

Rear Panel Connectors (Cont.):

Ethernet Link/Activity LED	• LEDs show communication activity, connection status, speeds, and mode
	information:
	SPD (speed) - Yellow LED lights On when the connection speed is 100
	Mbps and turns Off when the speed is 10 Mbps.
	L/A (link/activity) - Green LED lights On when the Ethernet cables are
	connected/terminated correctly, and blinks when receiving Ethernet data
	packets.
AXlink LED	• Green LED indicates the state of the AXlink connector port.
	• Normal AXlink activity = 1 blink/second
	• Abnormal AXlink activity = cycle of 3 consecutive blinks and then Off
AXlink port	• 4-pin 3.5 mm mini-Phoenix (male) connector provides data and power to
	external control devices.
Power port	• 2-pin 3.5 mm mini-Phoenix (male) connector
Included Accessories:	• 2-pin 3.5 mm mini-Phoenix (female) PWR connector (41-5025)
	• 4-pin 3.5 mm mini-Phoenix (female) AXlink connector (41-5047)
	• 6-pin 3.5 mm mini-Phoenix (female) I/O connector (41-5063)
	• 8-pin 3.5 mm mini-Phoenix (female) Relay connector (41-5083)
	• Installation Kit (KA2105-01):
	8-pin Relay Common Strip
	Four rack mount screws
	Four washers
	• NI-2000 Quick Start Guide
	• Two CC-NIRC IR Emitters
	• Two removable rack ears (62-2105-07)
Other AMX Equipment:	• 2-pin 3.5 mm mini-Phoenix male connector (41-5026)
	• CC-NIRC IR cables (FG10-000-11)
	• CC-NSER IR/Serial cables (FG10-007-10)
	• CSB Cable Support Bracket (FG517)
	• NCK, NetLinx Connector Kit (FG2902)
	• STS, Serial To Screw Terminal (FG959)
	• Upgrade Compact Flash (factory programmed with firmware):
	NXA-CFNI64M - 64 MB compact flash card (FG2116-31)
	NXA-CFNI128M - 128 MB compact flash card (FG2116-32)
	NXA-CFNI256M - 256 MB compact flash card (FG2116-33)
	NXA-CFNI512M - 512 MB compact flash card (FG2116-34)
	NXA-CFNI1G - 1 GB compact flash card (FG2116-35)

NI-2000, NI-3000, NI-4000 Hardware Reference Guide 5