AMX NXI-x000 Series manual Table of Contents

	Table of Contents
Table of Contents
Introduction	1
NI-2000 Specifications	2
NI-3000 Specifications	6
NI-4000 Specifications	10
Related Documents	14
Installation and Upgrading	15
Installing NetLinx Control Cards (NI-4000 Only)	15
Setting the NetLinx Control Card Addresses (NI-4000 Only)	16
Device:Port:System (D:P:S)	16
Removing NetLinx Control Cards (NI-4000 Only)	17
Compact Flash Upgrades	17
Accessing The Internal Components On An Integrated Controller	17
Installation of Compact Flash Upgrades	18
Closing and Securing the Outer Housing	19
Installing Into An Equipment Rack	19
Connections and Wiring	21
Setting the Configuration DIP Switch (for the Program Port)	21
Baud Rate Settings	21
Program Run Disable (PRD) Mode	21
Working With the Configuration DIP Switch	22
Setting the CardFrame DIP Switch (NI-4000 Only)	22
Program Port Connections and Wiring	22
Modes and Front Panel LED Blink Patterns	23
Port Assignments and Functionality	23
AXlink Port and LED	24
Wiring Guidelines	24
Wiring length guidelines	24
Preparing Captive Wires	25
Wiring a Power Connection	25
Using the 4-Pin Mini-Phoenix Connector For Data and Power	25
Using the 4-pin Mini-Phoenix Connector For Data With External Power	26
DB9 Device Port: Connections and Wiring	26
ICSNet Port: Connections and Wiring	27
ICSHub OUT Port: Connections and Wiring	28
Relay Port: Connections and Wiring	28
Relay Connections	28

NI-2000, NI-3000, NI-4000 Hardware Reference Guide i