AMX NXI-x000 Series Ethernet Ports Used By the Integrated Controller, Ethernet Port Descriptions

Connections and Wiring

Ethernet Ports Used By the Integrated Controller

Ethernet Port Descriptions

Port type	Description	Standard Port #
FTP	The on-board Master has a built-in FTP server.	21/20 (TCP)
SSH	The SSH port functions using the same interface as Telnet but over a	22 (TCP)
	secure shell where it uses SSL as a mechanism to configure and diagnose
	a NetLinx system.
	This port value is used for secure Telnet communication.
	Note: SSH version 2 is only supported.
Telnet	The NetLinx Telnet server provides a mechanism to configure and	23 (TCP)
	diagnose a NetLinx system.
	For maximum flexibility, the Master can be configured to utilize a different
	port than 23, or disable Telnet completely from either Telnet or the Pro-
	gram Port located on the rear of the Master itself. Once disabled, the only
	way to enable Telnet again is from the Master’s Program port.
HTTP	The Master has a built-in web server that complies with the HTTP 1.0	80 (TCP)
	specification and supports all of the required features of HTTP v1.1.
	This port is used for unsecure HTTP Internet communication between the
	web browser’s UI and the target Master.
HTTPS/SSL	This port is used by a web browser to securely communicate between the	443 (TCP)
	web server UI and the target Master. This port is also used to
	simultaneously encrypt this data using the SSL certificate information on
	the Master as a key.
ICSP	Peer-to-peer protocol used for both Master-to-Master and Master-to-	1319 (UDP/TCP)
	device communications.
	For maximum flexibility, the Master can be configured to utilize a different
	port than 1319, or disable ICSP over Ethernet completely from either
	Telnet or the Program Port located on the rear of the Master itself.
	This type of communication is used by the various AMX product for
	communication amongst themselves.
integration!	This feature on the Master uses, by default, port 10500 for the XML based	10500 (TCP)
Solutions	communication protocol. This port is connected to by the client web
	browser’s JVM when integration! Solutions control pages are retrieved
	from the on-board Master’s web server.
	For maximum flexibility, the on-board Master can be configured to utilize a
	different port than 10500 or to disable integration! Solutions completely.

32 NI-2000, NI-3000, NI-4000 Hardware Reference Guide