Husqvarna Rider 16 manual Driving, Starting the engine, Cold engine

DRIVING

•Read the safety instructions and information on the location and function of the controls before starting (see pages 7-14).

•Conduct daily maintenance before starting (see maintenance schedule on page 20).

Adjust the seat to the required position.

Starting the engine

1.Lift up the cutting unit by pulling the lever backwards to locked position (transport posi- tion).

2.Apply the parking brake. This is done as follows:

•Press down the brake pedal (1).

•Press in the lock button on the steering column (2).

•Release the brake pedal while the button is held pressed.

The parking brake lock disconnects automati cally when the brake pedal is pressed down.

Cold engine:

3.Push the throttle control to position 3 (choke position). In this position the engine receives a richer mixture so that the engine starts more easily.

2

1

1	2
	3
	English – 15