Husqvarna Rider 16 Warm engine, Driving, Set the throttle control midway between position 1 and

DRIVING

Warm engine:

4.Set the throttle control midway between position 1 and 2.

1	2
	3

5. Turn the ignition key to start position.

IMPORTANT INFORMATION

Do not run the starter for more than about 5 seconds at a time. If the engine does not start, wait about 10 seconds before trying again.

6.When the engine has started release the ignition key to neutral position.

Push the throttle control to the required speed. For cutting 3/4 to full throttle.

WARNING!

Never run the engine indoors, in enclosed or poorly ventilated areas. The exhaust fumes contain toxic carbon monoxide.

STOP START

STOP START

16 – English