4.Select Drivers and then Add Adapter....
5.Select Unlisted or updated network adapter and then OK
6.Enter x:\wfw, where x is your drive letter. Select OK.
7.Select CLOSE.
8.Select OK.
9.You will be prompted to reinstall specific
10.You will also be prompted to insert the Windows for Workgroups program application diskettes or
11.Select OK for any messages regarding updates to the SYSTEM.INI and PROTOCOL.INI files.
12.When prompted to restart your computer, select RESTART COMPUTER.
Windows for Workgroups will automatically restart your computer and the driver will be loaded.
13.At system startup, check for the following conditions to determine whether you have successfully installed the adapter:
v The device driver files loaded successfully. There are no error messages.
vThe adapter LEDs indicate normal operation. See “Understanding the adapter LEDs and labels” on page 43.
vYou are able to log on and communicate with the network.
If you experience problems, see “Chapter 4. Problem solving” on page 37.
Managed Driver Upgrade for Windows 95, Windows 98, Windows NT, and Windows 2000
Managed Driver Upgrade is a package you can download from the IBM
Managed Driver Upgrade can be run locally by the user, or remotely by a system administrator using management software such as Tivoli TME® 10 Software Distribution.
Running Managed Driver Upgrade locally
To run the Managed Driver Upgrade locally, perform the following procedure.
1.Download the correct package. There are packages for Windows 95, Windows 98, Windows NT 4.0, and Windows 2000.
2.Run the package and extract all the files to a single directory such as c:\temp.
3.If you are using Windows NT 4.0, log in using a user ID with administrator privileges.
4.Open a DOS or command window.
5.Run the Managed Driver Upgrade executable. The name of the executable is TRMDU95.EXE for Windows 95, TRMDU98.EXE for Windows 98, TRMDU00.EXE for Windows 2000, and TRMDUNT.EXE for Windows NT 4.0.
6.Enter the following command line options as needed. Refer to the following table.
