M16, Valid values 9 to, Valid values NO, YES

Table 11. DOS and OS/2 Configurable Driver Parameters in the NET.CFG file. (continued)

Parameter	Explanation
DATARATE	This keyword defines the data-rate setting for the adapter. It is recommended that clients be
	set to AUTO.
	This keyword is ignored for 100-Mbps network operation.
	Valid values:
	AUTO AutoSense – automatic ring-speed detection.
		Note: The adapter will not function with AutoSense if the adapter is the first one on
		the ring. AutoSense is not designed for changing ring speed while the adapter is
		operational. It is usually necessary to reload the driver.
	M16	16-Mbps ring-speed operation.
	M4	4-Mbps ring-speed operation.
	The default value is AUTO.

RXBUFFERS	This keyword defines the number of receive buffers used by the driver.
	Valid values: 9 to 64
	The default value is 16.

TXBUFFERS	This keyword defines the number of transmit buffers used by the driver.
	Valid values: 1 to 3
	The default value is 1.

FULLDUPLEX	This keyword influences whether a full-duplex network connection will be requested by the

adapter.

Valid values: NO, YES

The default value is YES.