IBM 22P6960 manual Installing the drive, Opening the computer, Unpacking the drive

Rear view of the drive

Pin 1

Reserved

Audio-out connector

This connector transmits the analog audio signals to an audio adapter.

Configuration pins

These pins are used to set the drive configuration.

IDE port

This connects the DVD-RAM/DVD-R drive to the IDE cable.

Power connector

This connects the DVD-RAM/DVD-R drive to the power cable.

Installing the drive

Follow these steps to install the DVD-RAM/DVD-R drive:

Step 1. Opening the computer

1.Turn off the computer and all attached devices.

2.Unplug all power cords from the computer and all attached devices.

3.Remove the cover from the computer. Refer to your computer documentation for instructions on removing the computer cover.

Step 2. Unpacking the drive

1.Before opening the antistatic bag that the drive is packed in, touch the bag to an unpainted metal surface for at least 2 seconds. This drains the static electricity from the package and your body.

2.Remove the drive from the bag.

Installation and user’s guide 1-5