Appendix C. Customizing the device-driverconfiguration settings
Microsoft Windows 95, Windows98, and Windows Me have two device-driver
configuration parameters: Auto Insert Notify and DMA.
The Auto Insert Notify parameter enables the computer to start playing or
accessing the disc automatically after being inserted in the drive. The DMA
parameter improves the computer performance by having the computer DMA
controller handle data transfers from the CD to memory,freeing the
microprocessor to perform other tasks. For example, activating DMA might
make movies and games run more smoothly because the microprocessor is
allocating more processing time to video.

Changing the Auto Insert Notify and DMA parameters for

Windows 95, Windows 98, and Windows Me

To change theAuto Insert Notify and DMA parameters in Windows 95,
Windows 98, and Windows Me, do the following:
1. Click Start →Settings →Control Panel.
2. Double-click System.
3. Click the Device Manager tab.
4. Double-click CD-ROM.
5. Select the device driver for the CD-RW/DVD-ROM Combination Drive.
6. Click Properties.
7. Click the Settings tab.
8. Click to select or to clear the Auto Insert Notification check box and the
DMA check box, depending on which parameters you want to enable or
disable.
9. Click OK.

Enabling DMA for Windows 2000 Professional

To change the parameter settings for Windows2000 Professional, do the
following:
1. Click Start →Settings →Control Panel.
2. Double-click System.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click the IDE ATA/ATAPI controller to expand the tree.
6. Click the device that corresponds to the controller where your DVD-RAM
is located (Primary IDE or Secondary IDE).
7. Click the Advanced Settings tab.
8. Click TransferMode, and select DMA if it is available.
© Copyright IBM Corp. 2001 C-1